Atlantik V2 just how to hook up to the Wi Fi Router or Control one or more light without router;

to get in touch the Atlantik V2.X to your property Wi Fi router you have to stick to the 11 actions.

1. Switch off all units.

2. Switch on just the very first product you will link.

3. In your tablet pick the wifi-socket.

4. Start Chrome from your own tablet and kind 192.168.1.100 into the target club.

5. Username admin password 000000

6. Change mode to Sat.

7. Place your community password and SSID. ( Encryption always Disable : ( the system think it is automaticly )

9. Head to system when you look at the primary menu, and then click restart.

10. Head to wifi establishing once more and alter to your community router SSID.

11. get the Orphek software and do search id, it will discover the unit that is first.

Then do from 1 to 11 for the units that are remaining.

7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).

Into the SSID field you will key in your community title. That is instance sensitive and painful therefore make sure to make use of money or letters that are small it really is proper. Into the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system think it is automaticly )

Select /Keep ,disable within the encryption field (don’t confuse with encryption key package). Your tablet will find the encryption automatically key in case your router supports it.

9. Within the left that is upper of UART display you certainly will a range of fundamental, Advanced, and System.

Select system TAB plus in the section that is first of web page you will notice a restart key. Press the restart key. a screen look saying the web web browser cannot hook up to the ip. That is fine as you should want to hook up to your router SSID.

10. On the tablet /Phone hook up to your Router network that is wi-fi SSID.

The clear button on the upper right of the screen 11.Open the Orphek app and click. Now click on the search key on the top left for the display screen. Your community should get the tablet as well as your IP that is new address your Orphek light should appear.

Perform actions 1 to 11 for the staying Orphek devices.

* choice : you are able to set the internet protocol address fixed , for better connection

You will then check out:

A. Unchecked The Enable DHCP

B. Enter a static internet protocol address that belongs to your residence router. For instance:

Then you are able to enter 100.168.20.2 or any internet protocol address between .2 and .254 In case the router is 100.168.20.1.

the IP address must be unique if not it shall result in an internet protocol address conflict

C. It’s also advisable to enter the submask plus in many cases its 255.255.255.0.

D. Enter the Gateway Address : it ought to be your Router IP

E. Then perform some exact exact exact same into the staying devices. BUT etch unit need unique internet protocol address .

instance:

In case your House Router set:

ssid: house

password : 12345678

internet protocol address 192.168.100.1

submusk 255.255.255.0

then chances are you should set device 1

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system think it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100.10

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system when you look at the menu that is main and then click restart.

12. get the Orphek application and do search id, it should get the unit that is first.

then chances are you should set product 2 –

OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )

1.work type: Sta

2.SSID: home

3.Encryption Disable : ( the system think it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7 . set : internet protocol address: 192.168.100. 11

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system within the menu that is main and then click restart.

12. get the Orphek software and do search id, it will find unit 2 .